Wood Magazine 154 by Bill Krier

Author:Bill Krier
Language: eng
Format: epub
Tags: Wood, Home and hobby woodworker
Publisher: Meredith Corporation
Published: 2004-03-25T05:00:00+00:00

?::' shank note, countersunk, centered

*8x M RH.

wood screw

2Chuck a -' round-over bit in your table-mounted router, and rout the top and bottom outside cdi:es of the I rivet. Finish-sand the round-overs,

3Apply three coals of penetrating-oil finish, following the directions on the container. Let the finish dry for several days. Now take a lew trivets into the kitchen and start cooking, ♦

Reuben Everett

Retired after 33 years as a heating, air conditioning, and refrigeration service technician, Reuben now pursues his love of turning by making bowls, boxes, pens, and trivets that he sells through galleries. He also does architectural turning, producing balusters, newels, and column bases. Reuben taught turning at the Hermitage Foundation Museum in Norfolk. Virginia, and served as president of Tidewater Turners of Virginia. He was a demonstrator at the 2002 and 2003 symposiums of the American Association of Woodturners.

Written by Jan Svec with Jeff Mert*

Project design: Reuben Everett, Virginia Beach, Va.

Illustrations: floxanne LeMoine

Cut into the blank, removing the patterns shaded portions. To avoid catching the toot in the grooves cut from the other side, use a very light touch as you near the final depth.

Loosen the retaining tabs. Rotate the tnvet blank 120", aligning the pattern's next index line with the auxiliary faceplate horizontal centerline. Tighten the tabs.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.